Open Access Open Access  Restricted Access Subscription or Fee Access

Artificial Neural Network Model for Control of Hydraulic Jump

Dr. A. G. Banhatti, Dr. G. A. Hinge

Abstract


End weir of particular geometry is used to control the location of hydraulic jump in the physical model of rectangular stilling basin. Normally hydraulic model studies are carried out with few numbers of discharges and it is presumed that the performance of model is consistent for intermediate values. In the present study ANN is used to model the experimental data and most suitable architecture is identified. This ANN is used to predict intermediate values of various parameters amongst available experimental values. This will be useful in getting a continuous spectrum of variation of the parameters instead of discrete values.

Keywords


Hydraulic Jump, Stilling Basin, End Weir, ANN

Full Text:

PDF

References


Bhowmik, N.G. (1975). “Stilling basin design for low Froude number”. J. Hydr. Engg., ASCE, 101(7), 901-915.

Chow, V.T. (1959). “Open channel hydraulics”. McGraw-Hill book company, Inc., New York, 1959.

Wu, S., Rajaratnam, N. (1995). “Free jumps, submerged jumps and wall jets”. J. Hydr. Res. 33(2), 197-212.

Rajaratnam, N., Subramanya, K. (1966). “Profile of the hydraulic jump”. J. Hydr. Engg., ASCE, 94(3), 663-672.

Peterka, A.J. (1984). “Hydraulic design of stilling basins and energy dissipators”. Eng. monograph no. 25, U.S. Bureau of Reclamation.

Rajaratnam, N., Murahari, V. (1971). “A contribution to forced hydraulic jumps”. J. Hydr. Res., 9 (2), 217-240.

Tung, Y.K., Mays, L.W. (1982). “Optimal design of stilling basins for overflow spillway”. J. Hydr. Engg., ASCE, 108(10), 1163-1178.

Moharami, H., Ghodsian, M., Bahramian, S. (2000). “Optimal design of stilling basin”. Proc. 4th International Conference on Hydro Science and Engineering, Seoul, 1-8.

Leutheusser, H.J., Kartha, V.C. (1972). “Effects of inflow condition on hydraulic jump”. J. Hydr. Engg., ASCE, 98(8), 1367-1385.

Ohtsu, I., Yasuda, Y., Yamanaka, Y. (1991).”Drag on vertical sill of forced jump”. J. Hydr. Res., 29(1), 29-47.

Vittal, N., Al-Garni, A.M. (1992). “Modified type III stilling basin – new method of design”. J. Hydr. Res., 30(4), 485-498.

Govinda Rao N.S., Rajaratnam, N. (1963). “The submerged hydraulic jump”. J.Hydr.Engg., ASCE, 89 (1), 139-162.

Hager, W.H. (1992). “Energy dissipators and hydraulic jump”. Kluwer academic publishers, Netherland.

Hinge, G. A. (2013). “A new technique for controlling the location of hydraulic jump in a rectangular channel”, Ph.D. Thesis, University of Pune.

Garud, D.L. (1984). “Chpter 23, P.W.D. Handbook”. Government of Maharashtra publisher.


Refbacks

  • There are currently no refbacks.