Design of High Accuracy Fixed Width Modified Booth Multiplier for MAC Unit
Abstract
In the majority of Digital Signal Processing (DSP)
applications the critical operations are the multiplication and
accumulation. Real-time signal processing requires high accuracy and high throughput Multiplier-Accumulator unit (MAC) to achieve a high performance digital signal processing system. We successfully proposed the MAC unit using high accuracy fixed-width Booth multiplier. The carry is generated from LSB minor part using Bitonic sorter based Carry generator. A sorting network is a special kind of
sorting algorithm, where the sequence of comparisons is not
data-dependent. Sorting network suitable for implementation in hardware or in parallel processor arrays. Bitonic sort is developed on the basis of the 0-1 principle. The 0-1-principle states that a comparator network that sorts every sequence of 0's and 1's in a sorting network. The simulation results show that the performance is superior to that using the direct-truncation fixed-width Booth multiplier.
Keywords
Full Text:
PDFReferences
Jiun-Ping Wang, Shiann-Rong Kuang and Shish-Chang Liang, “High
accuracy fixed-width modified Booth multipliers for lossy applications”,
IEEE Trans. Very Large Scale Integr. (VLSI) Syst., Vol. 19, No.1, Jan
G. O. Young, A. Inoue, R. Ohe, S. Kashiwakura, S. Mitarai, T. Tsuru,
and T. Izawa, “A 4.1-ns compact 54 * 54 multiplier utilizing sign select
Booth encoders,” IEEE J. Solid-State Circuits, vol. 32, no. 11, pp.
–1682, Nov. 1997.
F. Elguibaly, “A fast parallel multiplier-accumulator using the modified
Booth algorithm,” IEEE Trans. Circuits Syst. II, Reg. Papers, vol. 47, no.
, pp. 902–908, Sep. 2000.
W.-C. Yeh and C.-W. Jen, “High-speed Booth encoded parallel
multiplier design,” IEEE Trans. Computers, vol. 49, no. 7, pp. 692–701,
July 2000.
K. Choi and M. Song, “Design of a high performance 32*32-bit
multiplier with a novel sign select Booth encoder,” in Proc. IEEE Int.
Symp. Circuits and Systems, 2001, vol. 2, pp. 701–704.
Y. C. Lim, “Single precision multiplier with reduced circuit complexity
for signal processing applications,” IEEE Trans. Computer, vol. 41, no.
, pp. 1333–1336, Oct. 1992.
M. J. Schulte and E. E. Swartzlander, Jr., “Truncated multiplication with
correction constant,” in Proc. VLSI Signal Processing, VI, New York,
, pp. 388–396.
S. S. Kidambi, F. El-Guibaly, and A. Antoniou, “Area-efficient
multipliers for digital signal processing applications,” IEEE Trans.
Circuits Syst. II, Exp. Briefs, vol. 43, no. 2, pp. 90–94, Feb. 1996.
M.-A. Song, L.-D. Van, and S.-Y. Kuo, “Adaptive low-error fixed width
Booth multipliers,” IEICE Trans. Fundamentals, vol. E90-A, no. 6, pp.
–1187, Jun. 2007.
Y.-C. Liao, H.-C. Chang, and C.-W. Liu, “Carry estimation for two’s
complement fixed-width multipliers,” in Proc. IEEE Workshop Signal
Processing Systems, 2006, pp. 345–350.
Z. Hong and R. Sedgewick, “Notes on merging networks,” in Proc.ACM
Symp. Theory Comput., 1982, pp. 296–302.
Young-Ho Seo, Dong-Wook Kim, “A New VLSI Architecture of Parallel
Multiplier–Accumulator Based on Radix-2 Modified Booth Algorithm”
IEEE Trans. Very Large Scale Integr. (VLSI) Syst., Vol. 18, No.2, Feb
A. A. Farooqui and V. G. Oklobdzija, “General data-path organization of
a MAC unit for VLSI implementation of DSP processors,” in Proc. IEEE
Int. Symp. Circuits Syst., 1998, vol. 2, pp. 260–263.
S.J. Jou, C.Y.Chen, E.C. Yang, and C.C.Su(1995), “A pipelined
Multiplier-accumulator using a high speed, low power static and dynamic
full adder design”, IEEE Custom Integrated circuit conference, 1995, pp.
-5961
Kihak Shin, Ik Kyun Oh, Sang Min, Beom Seom Ryu,Kie Young Lee and
Tae Won Cho “ A Multi-Level Approach to Low Power Mac Design”
IEEE Trans.VLSI systems, vol 48 , pp 361- 763, 1999.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.