Email this article 
Open Access
Subscription or Fee Access
Design and Analysis of A Four Beam MEMS Piezoelectric Accelerometer
Abstract
Piezoelectricity is a phenomenon in which applied mechanical stress produces a electrical polarization and reciprocally an applied electric field produces a mechanical strain. The piezoelectric micro accelerometers have wide applications in the field of auto mobiles, inertial navigation and bio medical instrumentation. A bulk - micro machined quad beam piezoelectric accelerometer is proposed, designed and analyzed. The main application of this proposed accelerometer is in Bio Medical field. The most important specifications for medical applications are amplitude range +/-5g. resolution 10 -3g, bandwidth d.c.-50 Hz, off axis sensitivity < 5%, dimensions < 2 mm x 2 mm× 2 mm, low drift and power consumption < 1mW. The accelerometer design employs a single silicon seismic mass suspended by four beams. The beams of the accelerometers use the bimorph structure with two PZT films of piezoelectric material and poly silicon as the supporting layer. As the mass moves relative to the anchor, the beams deflect causing the piezoelectric layers to deform and hence a charge is induced. .The amount of charge generated depends upon the piezoelectric properties of PZT material, and many dimensional design considerations. This design is proved to get very high sensitivity, good frequency response and low cross axis sensitivity.
The Z-Axis sensitivity is found to be 4.4X10-14 Col/m/sec2 and X-/Y Axis sensitivities are found to be1.4X10-14Col/m/sec2 with very low cross axis sensitivity.
Keywords
References
Y. Nemirovsky, A. Nemirovsky, P. Muralt, N. Setter, Design of a novel thin film piezoelectric accelerometer, Sensors and Actuators A 56, (1996), 239-249.
Don L. Devoe Albert P. Pisano, Surface Micro machined Piezoelectric Accelerometers, Journal of Micro electromechanical Systems, Vol.l0, No.2, June 2001, 180-1 86.
Roger De Reus, Jens Ole Gullov, and Patrick R Scheeper, ‘‘Fabrication and characterization of a piezoelectric accelerometer," Journal of Micromechanics and Micro engineering, Vol. 9 (1999). pp. 123-126
S. P. Beeby, N. Ross, and N. M. White, Thick film PZT/micro machined silicon accelerometer, IEEE Electron. Letter, vol. 35, no. 23, pp. 2060–2062, 1999.
D. Eichner, M. Giousouf, and W. von Munch, Measurements on micro machined silicon accelerometers with piezoelectric sensor action, Sens. Actuators, vol. A76, pp. 247–252, 1999.
J. G. Smits, Susan I. Dalke, Thomas K. Cooney. The Constituent Equations of Piezoelectric Bimorphs. Sensors and Actaators, Vol. 28 1991 pp.41-61.
M. S. Weinberg, Working equations for piezoelectric actuators and sensors, J. Microelectromech. Systems, vol. 8, pp. 529–533, Dec. 1999.
L.M. Roylance, J. B. Angell, A batch-fabricated silicon accelerometer, IEEE transactions on electron devices, ED-26 (1979) 1911-1917
W. Kuehnel and 8. Sherman, A surface micromachined silicon accelerometer with on-chip detection circuitry, Sensors and ActuatorsA, 45 (1994) 7-16.
H. Fritsch et al. A low-frequency micromechanical resonant vibration sensor for wear monitoring / Sensors amt Actuators A 62 (1997) 616-620.
Gavin K. Ho, Reza Abdolvand, , Abhishek Sivapurapu, Shweta Humad, and Farrokh Ayazi, Piezoelectric-on-Silicon Lateral Bulk Acoustic Wave Micromechanical Resonators, Journal of micro electro mechanical systems, VOL. 17, NO. 2, April 2008.
S. Trolier-McKinstry and R. Muralt, “Thin film piezoelectrics for MEMS,” J. Electroceramics, vol. 12, no. 1/2, pp. 7–17, Jan. 2004.
MSY Siva Prasad, “Design and development of differential capacitive accelerometer”, Proceedings of ISSS International Conference on Smart structures and systems, July 28-30, 2005 Bangalore, India.
George Juraj Stein,” Some recent developments in acceleration sensors”, Measurement science review, Vol.1, Number1, pp.183-186, 2001.
R. J. Roark and W. C. Young, “Formulas for stress and strain”, Mc. Graw Hill, 1983
Navid Yazdi, Farrokh Ayazi and Khalil Najafi, “Micromachined Inertial Sensors”, Proc of IEEE, Vol.86, No.8, Aug 1998
Hitesh K. Gatty, B. R. Abhay, R. Vinayak Rakshith, K. P. Venkatesh and Navakanth Bhat, “Design and analysis of general purpose MEMS accelerometer”, International Conference on Sensors and Related Networks(SENNET’07),VIT University, Vellore, India, pp.191-197, Dec 12-14,2007.
Noel E. duToit, and Brian L. Wardle, Performance of Microfabricated Piezoelectric Vibration Energy Harvesters, Integrated Ferroelectrics, 83: 13–32, 2006.
S. Trolier-Mckinstry and P. Murali, Thin Film Piezoelectrics for MEMS, Journal of Electroceramics, 12, 7–17, 2004.
Genvin A. L. Meijer, Klaas R. Westerterp, Francois M. H. Verhoeven, Hans B. M. Koper, and Foppe ten Hoor, Methods to Assess Physical Activity with Special Reference to Motion Sensors and Accelerometers, IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, VOL. 38. NO. 3, MARCH 1991.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.