Performance of Matrix Converter in a DG Interconnected Power Grid Using Matlab
This paper deals with modelling and simulation in MATLAB/Simulink of wind farm DFIG interconnected with a matrix converter. The Matrix converter is mainly used to convert the constant voltage and frequency sinusoidal supply into variable voltage and frequency. In a grid where industrial load is connected, the matrix converter is used. The main advantage is that the phase sequence problem is minimized. The switching algorithm is based on an indirect phase vector modulation allows direct control of input current and output voltage. Hence allows the power factor of the source to be controlled. The results are validated through simulation.
Dr John Fletcher and Jin Yang University of Strathclyde, Glasgow United Kingdom, Introduction to Doubly-Fed Induction Generator for Wind Power Applications. MÜLLER,M. DEICKE,& R I K W.DE DONCKER, a doubly fed induction generator systems.
Sharon D. Ronald, A. Sheela, S. Josephin Mary Three Phase to Three Phase Direct Matrix Converter using SPWM Technique International Journal of Soft Computing and Engineering (IJSCE) ISSN: 2231-2307, Volume-3, Issue-2, May 2013.
Abhijit Mandal1, Manoj Kumar Nigam21 (M.E.[Power Electronics] Scholar, Raipur Institute of Technology, Raipur[C.G.],India - 492101)2(Department of Electrical Engineering, Raipur Institute of Technology, Raipur[C.G.], India - 492101).
Performance Comparison of Matrix Converter fed InductionMotor Drive using PI and PID ControlIOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE)ISSN: 2278-1676 Volume 4, Issue 2 (Jan. - Feb. 2013), PP 12-19.
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.