Open Access Open Access  Restricted Access Subscription or Fee Access

Design of High Speed Digitally Controlled SMPS by using QFET and ISA-PID in MSP-430

Kaliprasad Mahapatro

Abstract


The idea of the research work is to design a digitally
controlled SMPS using a high speed controller MSP-430.This works differs in the sense that MSP-430 can be able to generate high speed variably controlled PWM(Pulse Width Modulation) signal, that vary the frequency linearly with adequate resolution. This idea will replace the standard hard wired or digitally controlled MOSFET driver by a digitally controlled QFET technology. As MSP-430 is able to generate a dynamic PWM signal, it can also take feedback signal from SMPS and keep an eye on the current status of the SMPS.This feedback control is implemented in MSP-430 by using ISA-PID algorithm, which calculate an error value as a difference between a measured process variable and a desired setpoint [voltage in our case].The controller attempts to minimize the error by adjusting the process control input.


Keywords


SMPS, MSP-430, QFET [FQP34N20L], ISA-PID.

Full Text:

PDF

References


H. W. Xin Chen, ChunYing Gong, ―The full digital control based

switched mode power supply,‖ IEEE COMPEL Workshop, pp. 250 –

, July 2006.

R. Z. Jeffrey Morroni and D. Maksimovic, ―Design and implementation

of an adaptive tuning system based on desired phase margin for digitally

controlled dcdc converters,‖ IEEE TRANSACTIONS ON POWER

ELECTRONICS, vol. 24, no. 2, pp. 559 – 564, February 2009.

Y. Z. Jie Zhang, Yunping Zou and J. Tang, ―Dsp implementation of

digitally controlled smps,‖ The 33rd Annual Conference of the IEEE

Industrial Electronics Society, pp. 1484 – 1488, Nov 2007.

I. Petar J. Grbovi´c, Senior Member, ―High-voltage auxiliary power

supply using series-connected mosfets and floating self-driving

technique,‖ IEEE TRANSACTIONS ON INDUSTRIAL

ELECTRONICS,VOL.56, NO. 5, 2009.

Y. Jiang, ―Intelligent flow totalizer based on msp43o mixed single

microcontroller,‖ IEEE Sensors Applications Symposium, February

V. V. Karel Dudacek, ―Experimental evaluation of the msp430

microcontroller power requirements,‖ EUROCON The International

Conference on Computer as a Tool, September 2007.

A. T. A. Cebrian, J. Rey and J. Millet, ―Adapting power consumption to

performance requirements in a msp430 microcontroller,‖ IEEE, pp.83 –

, 2005.

H. Z. Xiuxiang Zhu and Y. Zhang, ―Design of a digital signal current

detector,‖ IEEE, pp. 1713 – 1717, 2010.

W. Z. Q. W. Q. Z. Jianjun and J. Yin, ―Design of a portable insulin

syringe based on msp430 mcu,‖ IEEE 3rd International Conference on

Biomedical Engineering and Informatics, pp. 1459 – 1462, 2010.

Y. Zhao, ―Monitor and control system design of grain depot temperature

based on wireless communication technology,‖ First International

Workshop on Education Technology and Computer Science, pp. 983 –

, 2009.

X. G. Yong Zhang and J. Zhang, ―Heat meter with ultra-low-power

consumption microcontroller,‖ IEEE, pp. 1079 – 1081, 2008.

S. L. Wang Hongyun yo Zhimin, ―Study of multicycle frequency

measurment,‖ Second WRI Global Congress on Intelligent Systems, pp.

– 227, 2010.

Y. Z. Xiuxiang Zhu, Huifen Zhang, ―Design of a digital signal current

detector,‖ IEEE, pp. 225 – 227, 2010.

Chun-Hung Yang, Chun-Nan LiU, Chien-Hung Tsai, ―Direct Digital

Compensator Design for Switching Converters‖ IEEE, pp 143-146,2010.

H.Riazmontazer, J.S.Moghani, M.Taheri, H.Bayat, ―Averaged

Modeling Of A New Bi-directional DC-DC Converter ‖,2nd Power

Electronics, Drive Systems and Technologies Conference, pp .579—580


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.