Remote Data Acquisition System Based on Arm Processor
Abstract
Data acquisition system is an embedded system, which collects the data at predefined time intervals from different sensors for different physical measurements like temperature, vibration, light, Voltage variations, etc. In fact, anything that you need to measure. In stand-alone data acquisition system, the output may be in the form of display, buzzer, memory storage devices etc. These devices placed in different locations are used to collect the data and, this data can be transmitted to centrally located PC servers, for further analysis and storage via different communication mediums TCP/IP. This can also be called as Remote Data acquisition system. The microcontroller based embedded device that collects the data from the sensors and transmit to remote PC server via modem .The main purpose of using IP, is to transfer the collected data from different locations and to overcome the limitation of serial communication. This data acquisition system consists of two parts Control unit and Communication unit. The control unit is having one micro-controller interfaced with A to D converter, which converts analog signals to digital form. The microcontroller will be interfaced with modem and then the data is sent through LAN OR WAN.
Keywords
Full Text:
PDFReferences
Xi B., Fang Y.J., „Application of embedding technology in networking of serial-port devices”]. Electric Power Automation Equipment, 2007,27,(8): 99-101.
Zhang H., Huang Y.Y., Peng D.G, “EGI based on the Modbus protocol for EWS”. Mechatronics, 2007,13(2): 15-18.
Li J, Zhang B, Qiu D.Y, “Multi-computer communication based on Modbus RTU in power quality monitoring system” Electric Power Automation Equipment, 2007,27,(1):93-96.
Yue Y., Zhang C.G., Yuang A.J, “Design and implementation of embedded man-machine interface based on Modbus”. Industrial Control Computer, 2006, 19 (1):8-10.
Peng D.G, Zhang H., Yang L., etc, “Design and Realization of Modbus Protocol Based on Embedded Linux System”. The 2008 International Conference on Embedded Software and Systems Symposia. July 29-31, 2008, Chengdu, Sichuan, China, pp:275-280.
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.