Design of Fixed-Width Multiplier using Baugh-Wooley Algorithm
Nicola Petra,Davide De Caro,Valeria Garofalo,Ettore Napoli,Antonio Giuseppe Mario Strollo,”Design of Fixed Width Multipliers with Linear Compensation Function “, IEEE Trans. Circuit Syst, vol 58,no.5, May 2011.
N. Petra, D. De Caro, and A.G.M. Strollo, “Design of fixed-width multipliers with minimum mean square error,” in Proc. IEEE Eur. Conf.Circuits Theory Des. (ECCTD 2007), Sevilla, Spain, Aug. 2007, pp.464–467.
R. Michard, A. Tisserand, and N. Veyrat-Charvillon, “Carry prediction and selection for truncated multiplication,” in Proc. Workshop Signal Process. Syst. (SiPS), Banff, AB, Canada, Oct. 2006, pp. 339–344.
S. Das and S. P. Khatri, “Generation of the optimal bit-width topology of the Fast Hybrid adder in a Parallel Multiplier,” in IEEE Int. Conf.Integr. Circuit Des. Technol. (ICICDT ’07), May 2007, pp. 1–6.
J. E. Stine andO.M.Duverne, “Variations on truncated multiplication,”in Proc. Euromicro Symp. Digit. Syst. Des., 2003, pp. 112–119.
C Magnus Själander and Per Larsson-Edefors, ”Multiplication Acceleration Through Twin Precision”. In IEEE Transactions on Very Large Scale Integration(VLSI) Systems, vol. 17, NO. 9, september 2009.
L. Van and C. Yang, “Generalized low-error area-efficient fixed-width multipliers,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 8, pp. 1608–1619, Aug. 2005.
V. Garofalo,“Truncated binary multipliers with minimum mean square error: Analytical characterization, circuit implementation and applications,” Ph. D. dissertation, Dept. Electron. Eng., Univ. Napoli Federico II, Napoli, Italy, 2009.
S. S. Kidambi, F. El-Guibaly, and A. Antonious, “Areaefficient multipliers for digital signal processingapplications,”IEEE Trans. Circuits and Systems II, Analog Digit. Signal Process., vol. 43, no. 2, pp. 90–95,Feb. 1996.
E. J. King and E. E. Swartzlander, Jr, “Data dependent truncated scheme for parallel multiplication,” in Proc. 31th Asilomar Conf. Signals, Circuits Syst., 1997, pp. 1178–1182.
H. Park and E. E. Swartzlander, Jr, “Truncated multiplication with symmetric correction,” in Proc. Asilomar Conf. Signals, Systems Comput. (ACSSC), Oct. 2006, pp. 931–934.
S. R. Kuang and J. P. Wang, “Low-error configurable truncated multipliers for multiply-accumulate applications,” Electron. Lett., vol. 42, no. 16, pp. 904–905, Aug. 2006.
D. De Caro and A. G. M. Strollo, “High-performance direct digital frequency synthesizers using piecewise-polynomial approximation,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 52, no. 2, pp. 324–337, Feb. 2005.
V. G. Oklobdzija, D. Villeger, and S. S. Liu, “A method for speed optimized partial product reduction and generation of fast parallel multipliers using an algorithmic approach,” IEEE Trans. Comput., vol. 45, no. 3, pp. 294–306, Mar. 1996.
P. F. Stelling, C. U. Martel, V. G. Oklobdzija, and R. Ravi, “Optimal circuits far parallel multipliers,” IEEE Trans. Comput., vol. 47, no. 3, pp. 273–285, Mar. 1998.
N. Petra, D. De Caro, V. Garofalo, E. Napoli, and A. G. M. Strollo,“Truncated binary multipliers with variable correction and minimum mean square error,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 57,no. 6, pp. 1312–1325, Jun. 2010.
Y. C. Lim, “Single-precision multiplier with reduced circuit complexity for signal processing applications,” IEEE Trans. Comput., vol. 41, no. 10, pp. 1333–1336, Oct. 1992.
M. J. Schulte and E. E. Swartzlander, Jr, “Truncated multiplication with correction constant (for DSP),” in Proc. Workshop VLSI SignalProcess., Oct. 1993, pp. 388–396.
J. M. Jou, S. R. Kuang, and R. D. Chen, “Design of low-error fixedwidth multipliers for DSP Applications,” IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 46, no. 6, pp. 836–842, Jun. 1999.
L. Van, S. Wang, and W. Feng, “Design of the lower error fixed-width multiplier and its application,” IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 47, no. 10, pp. 1112–1118, Oct. 2000.
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License.